MarkB Posted May 9, 2014 Share Posted May 9, 2014 Has anyone fitted a Mk1 non rotoflex spring to a Mk2. On paper could be a good mod. 270lb vs 215Lb 12mm narrower fitted length so should give a little more negative and about 42mm lower. Am i missing something? Quote Link to comment Share on other sites More sharing options...
Mark Hammond Posted May 9, 2014 Share Posted May 9, 2014 I tried that on my MKll back in the 70's and found that it bottomed out with anything in the boot or back seat.Mark Quote Link to comment Share on other sites More sharing options...
garyf Posted May 9, 2014 Share Posted May 9, 2014 I've never tried it but the profile of the Mk2 Spring is different to the Mk1? You may find the camber is all wrong and you wear out the Rotoflex Couplings too!??) May work with a CV conversion. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.