Jump to content

Recommended Posts

Hi all,
Just finished refurb of my dolly sprint wheels (very nice n shiny they are too) I know i need longer studs n spacers but what tyre size can i get  away with, they are 5.5j
want a faily wide, low profile look without going daft......was thinking 185 x 60 x 13.

Link to comment
Share on other sites

Yep, good choice. 175/70 13 also ideal, but not quite as aggressive looking.
With the 60 profile tyre you will need to be careful with the rear spring and camber change, the 70's are much better suited really.

And remember you need the correct type of wheelnut. If possible I would use the larger 7/16 studs and sprint nuts, or 12mm metric, but not sure which nuts would work. I suspect some would be available though.

Link to comment
Share on other sites

Rimmjobs list the 7/16" Sprint studs as NLA now, not surprising at £10 EACH +VAT!

Was I chuffed when I pick up two dozen NOS ones at Stoneleigh for a tenner? 8)


185/60x13's dropping into obscurity, but 175x70x13's will remain a popular size as it's used by a lot of superminis.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...