Jump to content

Herald convertible windscreen surround welding


Adrianb
 Share

Recommended Posts

Hi, I am replacing the complete windscreen surround as the existing one resembles lace curtain! Before someone says don’t cut it off! Too late! So I now have a new surround and bulkhead  to weld together  my concern is when I weld around the outside of the base of the surround then clean up the weld I potentially weaken the join as I can’t do any work on the rear of the welds.Any suggestions,thank you.

Link to comment
Share on other sites

If you leave a gap for the weld to fill you should be fine. You can also knock the welds back before dressing and then skim with filler. It's no different to doing a butt weld anywhere else 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...