Jump to content

1200 Headlamp rim to body gasket.... do they exist?


Recommended Posts

Quoted from robche-

Cheers Dan

I've just spent hours making gaskets for my sidelights out of neoprene foam but I can't find any rubber sheet. Needs to be about 4 mm thick looking at the old one, any ideas?

Have a look on fleabay, I've often found it a good source of similar sheet materials in small quantities.

Link to comment
Share on other sites

I've just successfully done this..


 cut out the centre hole after marking with dividers or similar. Mount the rim plate with the incomplete gasket to the bonnet then fit the chrome surround. use a white marker to show where to cut the outline. Dismantle, cut with sharp stanley knife and jobs a good 'un. 


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...