Jump to content

DoZ

Recommended Posts

Has anyone got any advise on how to get the exhaust to seal to the head?  I replaced my GT6 engine with a 2.5 and can't get the new one to seal to the exhaust manifold.  I have checked the manifold face and made sure it is clean but it still blows mainly on cylinder 1.

Any ideas?  Can you use gasket goo on exhausts?

DoZ

Link to comment
Share on other sites

I presume you mean the exhaust manifold seating against the head? If so check the manifold isn't cracked. That happened on my Herald and it took me ages to find the problem, in fact I only found it after re-fitting it for umpteenth time and the cracked bit finally fell off!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...