Crockett Posted July 9, 2007 Share Posted July 9, 2007 Okay. My son's car's front door seal rubbers had disintegrated and we've now got hold of some new ones. That was the easy bit. The question is how do we fit them?Pushing them through the channel looked possible but wasn't in practise and I figured, after nearly an hour of trying, that this probably wasn't how it was done on the production line or Leyland would have made even bigger losses.I thought of maybe forcing them into the groove using a tool of some kind but does anyone have any advice on how to do this?CheersDaryl. Link to comment Share on other sites More sharing options...
steadyg Posted July 9, 2007 Share Posted July 9, 2007 Daryl[i thought of maybe forcing them into the groove using a tool of some kind ]Thats the only way i found to do it. Takes ages and be careful not to damage the paint.Garry Link to comment Share on other sites More sharing options...
Richard B Posted July 9, 2007 Share Posted July 9, 2007 Flat blade screw-driver pushing from one side. Link to comment Share on other sites More sharing options...
Crockett Posted July 10, 2007 Author Share Posted July 10, 2007 Richard_B wrote:Flat blade screw-driver pushing from one side.Perfect! Job done :) Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.