WeeAndy Posted November 3, 2010 Share Posted November 3, 2010 How do you fit door seals , there is a channel that the rubber slides into, is there a tool to prise rubber into channel? or is there some technique to just slideing seal along channel?WeeAndy looks like a very tight fit Link to comment Share on other sites More sharing options...
Richard B Posted November 3, 2010 Share Posted November 3, 2010 I just use a thick flat blade screwdriver to prise them in. Carefully....The new seals are just a circle, whereas the old ones were shaped for the square corners at the top of the windows. Link to comment Share on other sites More sharing options...
WeeAndy Posted November 3, 2010 Author Share Posted November 3, 2010 I got a sample from a company called Seals + Direct, i removed old seals , cut a cross sectional area and looks like a perfect match its an srs1915 seal, cheaper than buying door seals from rimmerwww.sealsplusdirect.co.ukyou match seal online and email them for a free sample to see if they match. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.