door quarter lights

[Neilriser]

Hi all just stripping doors ready for blasting am i right in thinking that the whole quarter light assembly cannot be removed from the door? what about the window wind assembly? Regards Neil

[pimp my vit]

You can strip the door right down including quarter lights and window winders...send me a message with your email and I will send you copy of body training notes that show the door strip down.

[Neilriser]

Many thanks ,i cant see how the quarter light assembly can come out its disconnected all bolts undone but the top bracket is to wide to pull through top of door? am i missing something? Neil

[animator]

It is slightly too wide ,I used a wooden wedge and carefully widened the gap until it was free.

[pimp my vit]

Instructions sent by email...enjoy and good luck, it is very tight, slide them towards the centre of the door, but as mentioned you may have to widen the gap a little bit with a wedge.

[midgeman]

As said previously slide them to the centre of the door they DO come out trust me.
I made a small wooden wedge that SLIGHTLY opened up the gap leaving both hands free to wiggle the frame about a bit.