Hobby Posted January 20, 2012 Share Posted January 20, 2012 I have a quick couple of questions and also need a bit of trim, hopefully someone can help me!First the trim, I've noticed (a bit late!) that the driver's door doesn't have its chrome trim piece on the outside (the one between the glass and the door)... I hope that you know what i mean, if not i can post a piccy... Also the one on the back door (same side) is loose... Has anyone got that trim I could have, and is it just clipped in place?The other question relates to the bonnet, which seems a little flimsy. Looking at it when open it seems like much of the frame on the inside isn't attached to the bonnet panel, and I suspect it should be! Has anyone else had this issue (I think it may be caused by the bonnet being opened by lifting from the side instead of the middle). I would be surprised if its welded in place, looks more like it might be glued? Link to comment Share on other sites More sharing options...
logicaluk Posted January 23, 2012 Share Posted January 23, 2012 hi blaircheck your pmsthe bonnet has some seam sealer in those gaps id guess some silicone would do, or you could get a tube of tiger seal to stick it back together.Dan Link to comment Share on other sites More sharing options...
Toledo Man Posted January 24, 2012 Share Posted January 24, 2012 I might have those pieces of trim in question if I didn't sell them when I was at Gaydon. I'll check through my spares. Link to comment Share on other sites More sharing options...
Hobby Posted January 24, 2012 Author Share Posted January 24, 2012 Thanks chaps, Dan, I've returned your PM... Will have to check what else I need. I've only just got the car so it's early days at the moment!I'd never hear of Tiger Seal, had to look it up! Sounds like the stuff I need, though. I think I'll have to take the bonnet off to do it! Link to comment Share on other sites More sharing options...
Huff Posted January 24, 2012 Share Posted January 24, 2012 Pretty certain i have those trim pieces, might be a bit buried in the shed though, let me know if you dont have any luck elsewhere Link to comment Share on other sites More sharing options...
Hobby Posted January 25, 2012 Author Share Posted January 25, 2012 Ok thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.