Docman Posted February 22, 2011 Share Posted February 22, 2011 What's the procedure for removing door panels from GT6 MK3? Link to comment Share on other sites More sharing options...
Hugh Posted February 22, 2011 Share Posted February 22, 2011 If you want to keep the door cards to reuse I would have a look on the internet auction sites that are around there you will find a tool for removing the door card retaining clips. The door cards are quite easy to damage where the clips fit to the cards you could try putting a couple of thin wall scrapers ethier side of the clip and slowly prise the card off.Good Luck ;) Link to comment Share on other sites More sharing options...
Docman Posted February 22, 2011 Author Share Posted February 22, 2011 How do the window cranks come off? My door cards are pretty lumpy and wavy with orange cordory - Im not sure if they are worth recovering since new ones are available and probably not more expensive than recovering the old ones.If the cards are acceptable I would like to cover in leather. Link to comment Share on other sites More sharing options...
herald948 Posted February 22, 2011 Share Posted February 22, 2011 Grasp and push hard on the plastic escutcheon behind the window crank, and you should see a hole in the shank of the handle. In that hole is a pin you need to push through, after which the handle comes right off the shaft.It's a bit hard to see, but the pin is part number 600632 in this diagram (from Canleys):http://www.canleyclassics.com/?xhtml=xhtml/diagram/gt6mkiiidoorsealandtrimpads.html&xhtmlcatalogue=xhtml/catalogue/gt6mkiii.html&category=bodyandfittings&xsl=diagram.xsl Link to comment Share on other sites More sharing options...
thescrapman Posted February 22, 2011 Share Posted February 22, 2011 And teh pin will drop straight on teh floor never to be seen again.Put a cloth on teh ground first!CheersColin Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.