BodsMk1 Posted March 6, 2011 Share Posted March 6, 2011 Hi guys , well i finally got around to fitting the door innards today, the thing is i cant seem to adjust the 1/4 light and glass enough to stop the door glass from 'kicking out' at the top rear . It hardly touches the door seal if at all. Am i missing something , any advice gratefully recieved , cheers Link to comment Share on other sites More sharing options...
RedRooster Posted March 6, 2011 Share Posted March 6, 2011 I know its a pig of a job, but that doesn't sound right, can you take a photo of the door bits.RR Link to comment Share on other sites More sharing options...
TimW Posted March 7, 2011 Share Posted March 7, 2011 I have the same problem. It looks like the window regulator is worn thus causing the glass to come away from the quarter light in it's last 4 inches of travel. The only way i have found to fix this was to change the regulator for a good used item. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.