Carl2704 Posted June 8, 2011 Share Posted June 8, 2011 Good Morning,The door lock failed on me last week. It would open from the inside but not from the outside... I have now fixed this, but..... The rod from the internal handle that connects to the nylon block (I hope that you are keeping up) jumps out, so the internal handle now does not work! I am thinking of just using a Zip tie on the rod to the nylon block.. Any suggestions welcome. Link to comment Share on other sites More sharing options...
RedRooster Posted June 8, 2011 Share Posted June 8, 2011 Exactly what i used as the little clips that hold the rod in place are NLA.RR Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.