Mike Evans Posted December 10, 2011 Share Posted December 10, 2011 have recently bought a vitesse to add to the collection (will get done next year)while i wait to make a start ive been collecting parts etcthe door and rear quarter cappings are missing and the previous owner didnt know the car should even have them although the doors and tub have holes for themmy question is, are these cappings ebay Item number: 140652549667, too expensive as i feel that i could get some new ones made for less than these used ones are going foror does anyone know if they are available newi have a friend that is a cabinet maker but havnt seen him yet to see if he can make some for meany help would be apreciatedcheers mike Link to comment Share on other sites More sharing options...
thescrapman Posted December 10, 2011 Share Posted December 10, 2011 I really undersold my ones last month if that is the going rate... :-/I do have another set of front ones, not sure about rears.CheersColin Link to comment Share on other sites More sharing options...
Paudman Posted December 11, 2011 Share Posted December 11, 2011 Definitely unavailable new, unless a NOS set appears on eBay. They would be quite easy for a cabinet maker to replicate, all you need to do is to get him one to copy. At that price it could be a nice little sideline.... ;D Link to comment Share on other sites More sharing options...
Steve P Posted December 11, 2011 Share Posted December 11, 2011 Colins front ones are very reasonable, ;) ebay front sets normally go between £20-£40- rears less.i have some rears i dont need if you wanted to copy or use them,cost me £15.Steve Link to comment Share on other sites More sharing options...
Mike Evans Posted December 11, 2011 Author Share Posted December 11, 2011 how much would you want for the front ones colin?what would you take for the rears steve?, i think i would get them coppied as a set along with a new dash faciawould there be a good market for some replacement sets as i dont think my mate is that busy at the minute? Link to comment Share on other sites More sharing options...
Jonny-Jimbo Posted December 11, 2011 Share Posted December 11, 2011 I have a set or two, that I'm gonna be floggin in the near future on account of not needing three sets for one car.If you're interested email me on jon_fazowell@hotmail.com, which is on account of the fact my instand message service on this forum doesn't work. Link to comment Share on other sites More sharing options...
thescrapman Posted December 11, 2011 Share Posted December 11, 2011 Steve paid me £10 a piece lat month, so same again i guess.With the varnish stripped off and redone with a suitable product (not a tin of varnish from B&Q!!) they will be like new.I think a Rustins spray product is one suitabkle one.I'll fish them out and also look to see if i have any rears.CheersColin Link to comment Share on other sites More sharing options...
Mike Evans Posted December 11, 2011 Author Share Posted December 11, 2011 perfect, i dont mind refinishing them or at least using them for a template, have a look to see if you have any rears and just let me know, no mad panic for these as the cars not at the top of the que, need to do the 1200 coupe next when i finish the saloon we are on with, only had the coupe a year without touching it yet :Byou wouldnt have a good chassis for the coupe lying around would you? Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.