birchy Posted March 23, 2009 Share Posted March 23, 2009 Can anyone tell me the best finish for them i.e. Varnish or Lacquer?Ps If you remember I put a couple posts on a few months ago (engine problems, Rarebits engine)Well the engine is now rebuilt and back in the car. I am going start it up on Friday fingers crossed.Just want to say thanks for all your helpPaul Link to comment Share on other sites More sharing options...
Jason Posted March 23, 2009 Share Posted March 23, 2009 Well done and good luck!The product you want is called something like "Rustin's Plastic Coating" - if done properly it comes out looking factory. I have not used it myself but have seen the results.http://www.axminster.co.uk/product-Rustins-Rustins-Plastic-Coating-23018.htm Link to comment Share on other sites More sharing options...
100+ Posted March 23, 2009 Share Posted March 23, 2009 That's the stuff, I'm using it now, and it is excelent stuff. I am building a stereo and oil pressure gauge mount, and I have veneered a piece of plywood to exactly match the dashboard (offcut of the very same veneer I used to renew the dash...) and then use the rustin's over the top.It polishes up well, and is good to use. 1 part hardener to 4 parts laquer, stays workable in the jar for 2-3 days. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.