Einar Posted January 12, 2009 Share Posted January 12, 2009 I’m about to change door hinge pins due to some play in the hinge. How are these changed? I’ve just used a hammer and nail punch but it is not possible to move the pin. Any guidelines and suggestions are highly appreciated. Link to comment Share on other sites More sharing options...
Clive Posted January 12, 2009 Share Posted January 12, 2009 They are a real pain to do. BIG hammer, very strong punch. I have bent several hinges trying to do this very job :BClive Link to comment Share on other sites More sharing options...
Steve Cureton Posted January 12, 2009 Share Posted January 12, 2009 Easier to change the hinge Link to comment Share on other sites More sharing options...
Randal Posted January 12, 2009 Share Posted January 12, 2009 I have some old hinges but I see you are in Norway, it may be better to get new ones shipped over from rimmers. canley classics etc.Randal Link to comment Share on other sites More sharing options...
Einar Posted January 13, 2009 Author Share Posted January 13, 2009 OK - thanks. I may not bother and get a couple of new ones - or use without any play. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.