blueH Posted November 27, 2008 Share Posted November 27, 2008 I have re skinned the doors on my herald & have managed after a struggle to fit back the quarter lights, I will be fitting new rubber outer waist seals because old ones are perished, should I bolt the quarter light in position first then fit seal or is better to fit waist seal before quarter light is fixed securely, any observations would be appreciated.Norm Link to comment Share on other sites More sharing options...
Clive Posted November 27, 2008 Share Posted November 27, 2008 Hmm, I fitted the quarterlight first, think you would struggle with the seal in place. Needed to trim the seal too, as the large flap wont work in that area. And used sealant (sikaflex adhesive sealant stuff) to stick it in. Still there 14 years on. Lasted better than the rest of the car ;)Clive Link to comment Share on other sites More sharing options...
blueH Posted December 5, 2008 Author Share Posted December 5, 2008 Just had another query about fitting waist seal, should I fit the actual door window first or re-fit after waist seal has been properly fixed in position.Norm- Link to comment Share on other sites More sharing options...
Richard B Posted December 5, 2008 Share Posted December 5, 2008 Door glass first, you wont get the base of the frame past the glass seals. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.