JustinC Posted June 27, 2007 Share Posted June 27, 2007 Does anyone know where I can get some wooden door cappings for my Herald conv?Cheers Link to comment Share on other sites More sharing options...
CharlieB Posted June 27, 2007 Share Posted June 27, 2007 TSSC shop do them, not cheap though! Link to comment Share on other sites More sharing options...
roger.england Posted June 27, 2007 Share Posted June 27, 2007 I got mine refurbished by Chapman & Cliff - http://www.chapmanandcliff.co.uk/frames.htm Link to comment Share on other sites More sharing options...
Smallfry Posted June 28, 2007 Share Posted June 28, 2007 eBay normally, but they are seldom cheap. Link to comment Share on other sites More sharing options...
wfarnworth Posted June 28, 2007 Share Posted June 28, 2007 CharlieB wrote:TSSC shop do them, not cheap though!They just get them from Chapman and Cliff and put a markup on.You may as well cut out the middle man and save some money.Wayne Link to comment Share on other sites More sharing options...
Clive Posted June 28, 2007 Share Posted June 28, 2007 Autojumble best (cheapest!) bet. Fitted as std to vitesses. Link to comment Share on other sites More sharing options...
pete mk3 spit Posted June 28, 2007 Share Posted June 28, 2007 If your not in a rush you could build up a set through Ebay quite reasonably by buying them seperately , I bought 2 for the passenger door and both rear ones for £8 plus postage a few weeks back while complete sets were making a fortune . Link to comment Share on other sites More sharing options...
lordleonusa Posted June 28, 2007 Share Posted June 28, 2007 FWIW, the ones found in the Triumph 1300 FWD Saloon fit the Vitesse even better than the originals.ie. the top is curved in and the seats do not hit them.L Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.