Trifire Posted July 7, 2006 Share Posted July 7, 2006 Can any offer advice ?The door lock has come loose in the handle of my 13/60. How is it held in place, should I look for a complete handle or just a new lock at Stafford this weekend.Also will there be anybody offering services like oiling Trunions and fitting electronic ignition ( I have had a set sitting in the garage for the last few years, its about time they were used ! ) Link to comment Share on other sites More sharing options...
Clive Posted July 7, 2006 Share Posted July 7, 2006 Definately a trunnion oiler (Adam, good bloke) and he may fit leccy ignition too. If not there are usually some tuning vans around who should do the job.CheersClive Link to comment Share on other sites More sharing options...
Steve Cureton Posted July 7, 2006 Share Posted July 7, 2006 I fitted my own Pertronics electoronic ignition, it really is a doddle. I'm going to Stafford tomorrow (Saturday) so if you want me give a bit of advise and show how mine is fitted give me a bell on Satirday on 07790 490598 Link to comment Share on other sites More sharing options...
Trifire Posted July 8, 2006 Author Share Posted July 8, 2006 Thanks guys, I am going Sunday hope to get things sorted then.Cheers Sam Link to comment Share on other sites More sharing options...
Steve Cureton Posted July 9, 2006 Share Posted July 9, 2006 Re your door lock, there is a screw which holds the barrel assembly together and it may simply have worked loose. Link to comment Share on other sites More sharing options...
Trifire Posted July 9, 2006 Author Share Posted July 9, 2006 Steve,It has been loose for some time and I have been meaning to fix it ,I just didn't know how it goes together. You are right about the screw, when I got back from Stafford the lock fell on the drive and I can now see how its held in place. Hopefully the screw will be in the door panel, I got the trunions oiled but did not get the Lumenition ignition fitted, I will try a local garageCheers Sam Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.