Helen79h Posted August 15, 2008 Share Posted August 15, 2008 Hello, I have posted once before on the forum and now I have a request for parts. Does anyone know where I can get front doors for a triumph toledo? Both the front doors are rusting badly at the bottoms and as part of our overhaul of the car we want to replace them. I am going to post on the Practical Classics forum too.Thanks,Helen :) Link to comment Share on other sites More sharing options...
Toledo Man Posted August 15, 2008 Share Posted August 15, 2008 2-door or 4-door? Replacement 2-door ones are a bit hard to come by... Link to comment Share on other sites More sharing options...
PurpleBargeKen Posted August 16, 2008 Share Posted August 16, 2008 Hi Helen, try posting in the wanted section of the TDC forum as well.Ken Link to comment Share on other sites More sharing options...
dollyboy Posted August 17, 2008 Share Posted August 17, 2008 if its a 4 door, at least 2 pairs of complete front doors here if you REALLY want them.repair panels for the bottom sections (swage line downwards) are available, easier to get these welded on in many respects. not trying to be negative or anything but back doors are hard enough to line up. look how the front door hinges fit compared with back doors in terms of access... quite adjustable when 'loose', get them sort of lined up, then when you open the door to tighten the bolts - DOH!!!then after about half a day on one door and lots of swearing, when you've got it just about good enough, you might be able to start trying to adjust the lock so the door actually opens n closes properly :Ptrying to realign replacement front doors if they dont fit right is an absolute w@nker of a job usually requiring an extra pair of hands and a jack to help support the weight of the door, a very smooth level floor so your trolley jack can move easily on it, and the patience of a saint. i really would consider getting repair panels... ;) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.