molten Posted July 17, 2011 Share Posted July 17, 2011 Evening gentsJust trying to get some tips befor I attempt to refit the window mech parts in doors.I recall that when I removed them (not the correct way I might add) there seemed to be some thicker washers on some of the verticle glass track mounts. Are there any reasons for these thicker washers?What is best way to re-install?Thanks for any advice.Scott Link to comment Share on other sites More sharing options...
drofgum Posted July 18, 2011 Share Posted July 18, 2011 Scott,The thicker washers were probably there to adjust the window tracks so that they fit at the correct angle to make the glass meet the windscreen post and the hood. Without a record of their original locations refitting is a matter of trial and error. Good luck, Paul Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.