PDV Posted July 15, 2010 Share Posted July 15, 2010 About to start work on getting the rear tub restored back to something like it should be.It is basically in good condition, with the rust worm in the usual places but with lots of good metal near the areas that need repair.Have seen some in a lot worse condition for sure, although when I start to remove some of the paint from some previously repaired areas I know I am going to find more to do than it appears at the moment.I am starting on the boot area first and the rear light panels (part no 804613) need repairing.Not to difficult a job but the offside has had most of the metal replaced and both have had repairs to the lower parts.With the trim and lenses in place all looks ok but I want to get them back to as they should be as they are not repaired very well at all really.The problem is not having the dimensions or a photograph to go on and my searches so far show they are not available as replacements.If anybody has done this repair and has photographs or tips they could pass on, or if somebody is in a position to take some photographs and or measurements, that would be a great help.Steve Link to comment Share on other sites More sharing options...
thescrapman Posted July 15, 2010 Share Posted July 15, 2010 SteveI have a complete good condition rear tub for free here in Colchester if you want it for removing repair sections from.Mian issue is that it needs a seatbelt mount both side on teh sill area.CheersColin Link to comment Share on other sites More sharing options...
PDV Posted July 16, 2010 Author Share Posted July 16, 2010 Hi Colin,Have sent you a PM.Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.