Jump to content

Spit OEM front hub out of true...


Benjamin Swatton

Recommended Posts

It transpire's my disk was not out of true and neither is an axle bent and neither are the taper bearings as ive tried new - the problem can only be either the races which look good or the hub has been bored from new out of true? - dial gauge is showing about 0.007 to 9 wobble total range not helped by fact that caliper almost touches as well. What sort of trueness is OK? I have read in book it's 0.004 runout. The other side is 0.004-5 not had any brake scrub issues whereas the wobbler side I've has persistent brake scrub when manoeuvring /parking and I want it sorted it's naff.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...