daver clasper Posted April 12, 2018 Posted April 12, 2018 Hi. Finally saved a bit of cash to buy the correct ones that Bill Davis (Rarebits) was supplying. Rarebits website doesn't appear to exist anymore and no response from a previous email address and his private message name on here isn't available to PM him. Does anyone know if he is still doing any trading, or a way of contacting him please. Failing that, Baines seals have some seals on the the Triumph section of their website, that look a similar profile to Bills, though described as "draught excluders" and they have no knowledge of selling them as door seals for Vit/Herald. Wondered if anyone has used them for these, or any knowledge of other suppliers. Any help great, thanks Quote
marktheherald Posted April 12, 2018 Posted April 12, 2018 I've just bought some from Baines (DX73). Not fitted yet, but offering up a short length seems to be a vast improvement over the closed cell type. Quote
iggy Posted April 12, 2018 Posted April 12, 2018 Quoted from marktheherald- I've just bought some from Baines (DX73). Not fitted yet, but offering up a short length seems to be a vast improvement over the closed cell type. Quoted from daver clasper- Hi. Finally saved a bit of cash to buy the correct ones that Bill Davis (Rarebits) was supplying. Rarebits website doesn't appear to exist anymore and no response from a previous email address and his private message name on here isn't available to PM him. Does anyone know if he is still doing any trading, or a way of contacting him please. Failing that, Baines seals have some seals on the the Triumph section of their website, that look a similar profile to Bills, though described as "draught excluders" and they have no knowledge of selling them as door seals for Vit/Herald. Wondered if anyone has used them for these, or any knowledge of other suppliers. Any help great, thanks same here recently fitted a set of Baines door seals to my mk2 2500 saloon. easy to fit good quality and seal up the doors doors correctly Quote
JumpingFrog Posted April 12, 2018 Posted April 12, 2018 Bill/Rarebits has a page on Facebook, I've contacted him a couple of times recently. He still has some stuff, but I'm not sure if he's actively trading.Don't do what we did and buy cheap seals from eBay. These were just a generic 90 degree seal with a bubble/closed cross section. They were way too thick and the doors wouldn't close on them at all. Bad experience returning them too as they'd be cut by this point.In the end we got some from Fitchetts, which fitted perfectly. More expensive, but well worth it after the hassle of the others. These are a 90 degree bubble section too, but of the correct thickness.Admittedly, I'm not sure what the correct/original profile is e.g. whether it's a bubble or the "draught-excluder shape". Quote
Dave1360 Posted April 13, 2018 Posted April 13, 2018 I fitted the Baines DX73 ones a couple of weeks ago. They work a treat, although the passenger footwell is filling up from somewhere else now. The price of them virtually doubled when they added P&P on though. Quote
marktheherald Posted April 13, 2018 Posted April 13, 2018 I don't mind paying the postage if the seals work. Baines's web page does show the postage costs, so forewarned.. Quote
daver clasper Posted April 24, 2018 Author Posted April 24, 2018 Thanks a lot folks. Have got some off Bill cheers, Dave Quote
daver clasper Posted April 26, 2018 Author Posted April 26, 2018 Hi. Have fitted new seals and the doors were still a bit proud at bottom rear (a bit of tub spread probably). I Moved the striker plates in and looks a lot better, though the doors are needing a good hefty shove to close them. I think I read about bending the lip that the seal pushes onto, inwards a bit to help with this. Has anyone tried this, or any other tips please?. Cheers, Dave Quote
Pete Lewis Posted April 28, 2018 Posted April 28, 2018 dave you can simply hammer the flange to get an even gap all round the aperture but if its crushing the seal/tight at the B post waist and the door sticks out at the bottom then youre sure to have some tub spread its pretty common Pete Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.