GT6 Mk3 Door Part

[xebec]

Hi,
Following on from my earlier post entitled "Mk3 GT6 Restoration nearly complete" I am getting close to completion now however, I have come across a part that I cannot figure out exactly where it comes from. I am sure it comes from the doors as I bagged all parts for the doors in plastic bags clearly labeled for which door etc. I thought it was supposed to be one of the window upper and/or lower stops but I have those fitted consequently I am at a loss as to where it exactly fits. I cannot recall from what part of the door I removed the it from. I cannot find it in the parts manual neither.
I have attached a pic (first one) and hope someone can identify it. I have also included a couple of other pics.
Thanks  & Regards...Ken

[John Bonnett]

I would have thought it was a window stop but it's not quite the same as one of the ones in a set I made for a friend. Yours looks as if it has had a bit chewed out of it.

Your door latch looks really nice. Is it new?

[xebec]

Hi John,
Thanks for your input, the door latch is the original and not new. Those top parts that you show certainly look the same. What I don't understand is where they would fit. Do you happen to know by any chance? The top stops that I have are the same as what you show in the lower part of your pic. The bottom ones I have are large L shaped items that fit in the lower part of the door. I assume there are not supposed to be a total of three stops in one door. Hmm interesting...

[John Bonnett]

Quoted from xebec

Hi John,
Thanks for your input, the door latch is the original and not new. Those top parts that you show certainly look the same. What I don't understand is where they would fit. Do you happen to know by any chance? The top stops that I have are the same as what you show in the lower part of your pic. The bottom ones I have are large L shaped items that fit in the lower part of the door. I assume there are not supposed to be a total of three stops in one door. Hmm interesting...

You're in luck. I have a picture. I hope it helps

[xebec]

Hi John,
Thanks for the photo. In the end I have fitted both of the stops in your pic as top window stops. Why there should be a need for two upper stops I don't know but anyway as far as I can see problem sorted. Thanks.

[John Bonnett]

Quoted from xebec

Hi John,
Thanks for the photo. In the end I have fitted both of the stops in your pic as top window stops. Why there should be a need for two upper stops I don't know but anyway as far as I can see problem sorted. Thanks.

You're very welcome, I'm glad it was of help.  It sounds as if the L shaped stop you mention was added by a PO. I have three sets of doors and they all have the same glass stop arrangement; one to control fully open and the other, fully closed.