Fitting new front door seals

[Crockett]

Okay. My son's car's front door seal rubbers had disintegrated and we've now got hold of some new ones. That was the easy bit. The question is how do we fit them?

Pushing them through the channel looked possible but wasn't in practise and I figured, after nearly an hour of trying, that this probably wasn't how it was done on the production line or Leyland would have made even bigger losses.

I thought of maybe forcing them into the groove using a tool of some kind but does anyone have any advice on how to do this?

Cheers
Daryl.

[steadyg]

Daryl
[i thought of maybe forcing them into the groove using a tool of some kind ]
Thats the only way i found to do it. Takes ages and be careful not to damage the paint.

Garry

[Richard B]

Flat blade screw-driver pushing from one side.

[Crockett]

Richard_B wrote:

Flat blade screw-driver pushing from one side.

Perfect! Job done :)