Matt Neale Posted March 15, 2014 Posted March 15, 2014 HiHas anyone used the door bottom repair panels? I have been looking at the ones available from Paddocks. I wondered what the fit was like? Would I be better making and welding in patches? I'll be needing door bottom repairs too. I hoping these are pretty straight forward.I've attached pictures so you can see what I'm facing. There must be a quarter inch of filler in places. I bought two replacement doors but they are even worse!CheersMatt Quote
midgeman Posted March 15, 2014 Posted March 15, 2014 Hi MattI cannot comment on the section shown in your first picture however I did use the repair sections for the bottoms of the door skins.They were a relatively low cost panel purchased from Fittchetts of Telford and they did the job well.Alan. Quote
Pete Lewis Posted March 17, 2014 Posted March 17, 2014 as a compromise we added a plate inside the skin and filled with Marine Epoxy, fully water proof and tough as old nails3 yrs on and still sound , just an idea , Pete Quote
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.