midgeman Posted March 17, 2011 Posted March 17, 2011 What do you mean by Fitting Kit :-/.Midgeman.2445 wrote:Does any sell a rear valance fitting kit? :)
Stu 1986 Posted March 17, 2011 Posted March 17, 2011 Are you fitting steel or Fibreglass? I just replaced my rear valances with fibreglass ones and after some time fitting they went on and lined up easy enough. The steel ones should be even easier to do. :)
andycon67 Posted March 18, 2011 Author Posted March 18, 2011 My valances are missing and no bolts or screws to hold them on. i do not know what to use?Andy :-/
Richard B Posted March 18, 2011 Posted March 18, 2011 2445 wrote: i do not know what to use?Speak to Bill of Rarebits.
garyf Posted March 18, 2011 Posted March 18, 2011 You need some 'U' Type Spire clips and matching self tapping Bolts, this is how the valances where fixed on most Heralds/Vitesses (The very early 948 heralds valances where welded though)Most of the usual suspects Canleys, TD Fitchetts, etc should sell them, but it might be cheaper buying direct?try http://www.bresco.comRegardsGary
Mark Hammond Posted March 18, 2011 Posted March 18, 2011 garyf wrote:You need some 'U' Type Spire clips and matching self tapping Bolts, this is how the valances where fixed on most Heralds/Vitesses (The very early 948 heralds valances where welded though)Most of the usual suspects Canleys, TD Fitchetts, etc should sell them, but it might be cheaper buying direct?try http://www.bresco.comRegardsGaryOnly the side valances were fitted this way, the rear valance is fitted this way on the four edges that join the sides, and nuts, washers and bolts along the top edge with screws, washers and nuts where the lock latch is secured.Mark
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.