jollyjohn Posted April 14, 2009 Share Posted April 14, 2009 [face=Courier][/face]Good Morning All.Be glad of the experts advice!! Warning light stays on - took the switch off and it works. What or how does the cablework the switch please? My Trio -matic just reaching 80000 and going like a bird!! New exhaust, new tyres and a good polish..Wheeeee...Oh by the way I offer the following tip which I proved a few times. Rusted/tight bolts particularly exhaust ones. Warm a little and apply candle wax then heat up nice and hot. May need doing twice. Usually works.Ta in advance. Link to comment Share on other sites More sharing options...
Barry Acclaim Guru Posted April 14, 2009 Share Posted April 14, 2009 the wires you are looking for are a blue and a black. my guess is that the wire has been chaffed on the dash chassis and is shorting out.Turn on the ignition and then pull out the blue wire from its conector, and if the light stays on, then the blue wire is at fault, and if the light goes out, then the switch is at fault.hope this helps.b Link to comment Share on other sites More sharing options...
jollyjohn Posted April 15, 2009 Author Share Posted April 15, 2009 Thanks - the switch works ok off the choke but there does not seem to be anything to push it when fitted. ie I can see the cable moving but is there something that touches the switch 'button'?JJ Link to comment Share on other sites More sharing options...
Barry Acclaim Guru Posted April 15, 2009 Share Posted April 15, 2009 the switches were intended to be non serviceable items, and are replaced with the choke cable instead. if you have had the thing in bits then maybe a little spring went twang behind your back.b Link to comment Share on other sites More sharing options...
jollyjohn Posted April 16, 2009 Author Share Posted April 16, 2009 As these things do!! have to try the JJBODGE site then. ThanksJJ Link to comment Share on other sites More sharing options...
jollyjohn Posted May 4, 2009 Author Share Posted May 4, 2009 Chokey update - Got it working!! Undid the electrical switch (1 screw) andits activated by the cable but very sensitive. Gave the cable a slight bend with a paper clip!! Works a treat now.. All the best to ALLJJ Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.