dazzer Posted April 27, 2010 Share Posted April 27, 2010 Take 2.Just finished the complete rebuild (second time around) 2000 MK1 engine.All looking good. Mods this time include changing the seven middle head studs with MKII studs and a complete head rebuild all flowed and matched.Comp ratio is 10.85:1... a little higher than the 10:1 recommended.Any thoughts?I am using a distributor with a custom curve (curve attached) and a TR5 type cam. 150 strombergs/ inlet manifold with restrictions removed.Firing it up tomorrow!Cheersdarren Link to comment Share on other sites More sharing options...
James Posted April 27, 2010 Share Posted April 27, 2010 As the TR5 cam is a bit more racey your DCR should work out a bit less than the scary 10.85 might suggest. Link to comment Share on other sites More sharing options...
esxefi Posted April 28, 2010 Share Posted April 28, 2010 yep,dynamic is always less,plus lower ve with the 1.5 stroms,lets guess compression test at 150-60psi? :) Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.