Davemate Posted November 27, 2011 Share Posted November 27, 2011 Something is whistling on the engineI have sprayed WD 40 everywhere and it made no difference after removing the fan belt the sound stopped.I have refitted the belt and it's still quiet.With the fanbelt removed I can feel a little bit of "woble" if I try and rock the fan which means there must a bit of end play in the water pump.Should there be any movement or should it just spin round ,right round baby right round like a record baby ,right round,round ,round(sorry couldn't resist :P)Having just fitted a new pump to my herald along with a newly re-cored rad as the fan went through it,I don't want the same thing to happen to the wife's car Link to comment Share on other sites More sharing options...
Mark Hammond Posted November 27, 2011 Share Posted November 27, 2011 Could be Water Pump, sounds like it... The cheapo repro pumps made in india are naff, I've had 3 or 4 before finding a new old stock Unipart one.Mark Link to comment Share on other sites More sharing options...
MSter Posted November 27, 2011 Share Posted November 27, 2011 If it was me i would asscertain where the wobble is coming from i would remove the fan and see if the wobble was still there it maybe that the fan pulley is worn or not sitting plum, if once you get down to the waterpump shaft you can get hold of it and it wobbles then you know for sure its the water pump.I would have thought that there should be no wobble in the waterpump shaft otherwise it would lead to uneven bearing wear. Link to comment Share on other sites More sharing options...
Jordon T Posted November 27, 2011 Share Posted November 27, 2011 I had a similar problem a few weeks back, turned out my Alternator bearing was squealing, so i took the alternator back to the shop and replaced it as it was still under guaranty. Link to comment Share on other sites More sharing options...
Velocita Rosso Posted November 27, 2011 Share Posted November 27, 2011 If you hold the pulley,rather than fan, and try and `waggle it` and there is play, then the bearing is onits way out Link to comment Share on other sites More sharing options...
Steve Cureton Posted November 27, 2011 Share Posted November 27, 2011 There should be no wobble in the pump, but as said previously it could also be the dynamo/alternator. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.