GT6Craig Posted May 10, 2009 Share Posted May 10, 2009 Is a GT6 mk1 supposed to have one of these? If so what is its purpose and where might it be located? I have two wires coming from the dizzy, one goes to the neg and the other to the positive.....am i missing something here...?thanks! Link to comment Share on other sites More sharing options...
GreenV8Machine Posted May 10, 2009 Share Posted May 10, 2009 dont think it does, ballast resistors are usually attached to the block next to the coil. they knock the voltage down to 6V for a 6V coil.2 wires from dizzy neg and pos, that'll be your condesor/points, or electronic ign. Link to comment Share on other sites More sharing options...
GT6Craig Posted May 10, 2009 Author Share Posted May 10, 2009 Thanks for clearing that up! Link to comment Share on other sites More sharing options...
cook1e Posted May 10, 2009 Share Posted May 10, 2009 Acording to the woring diagram for a MK1 in the Genuine Triumph workshop manual I can confirm that the MK1 does not have a ballast resistor. Link to comment Share on other sites More sharing options...
GreenV8Machine Posted May 10, 2009 Share Posted May 10, 2009 aye, mkII does, MkIIIs did, later with ballast wire Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.