herald948 Posted October 29, 2011 Share Posted October 29, 2011 I scoured the Vitesse 6 SPC and couldn't find an answer. Does anyone know if the fuel line fitting to the front carburetor takes the same pipe nut and brass olive as goes on the other end of the fuel pipe (into the fuel pump)? Link to comment Share on other sites More sharing options...
Pete Lewis Posted October 30, 2011 Share Posted October 30, 2011 this solex carb sleeve pipe nut appears to be elusive,, but as most parts were off the shelf std fittings I would be pretty certain both ends will be the same ( sorry mine are long replaced with strombergs) 60176 seems to be whats used everywhere else . std 1/4" sleeve nut http://www.canleyclassics.com/searchforapart/?desc=&ptno=60176Peter Link to comment Share on other sites More sharing options...
herald948 Posted October 30, 2011 Author Share Posted October 30, 2011 Thanks, Pete. That's pretty much the conclusion I had come to...and hope to test if I can get out to my barn and find some old fittings to test in a spare Solex! Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.