questions about coil wiring

[daver clasper]

Hi everybody. I have recently bought a powerspark electronic ignition kit. My car is 67 vitesse 2ltre mk1, negative earth. my Lucas coil is currently wired as dizzy wire going to + terminal and ignition feed from harness to - terminal.
I understand this may have been done incorrectly and car will run ok under most conditions. There is also a wire from + terminal to a relay that is not live when ignition switched on. Could it have been wired this way to do with this?.
If not can I reverse the wiring back to normal and and run the relay wire to spare - terminal, or if not add an extra + terminal to coil make three and run it to here. The kit has two wires, red wire goes + coil terminal and black to - coil terminal. If done back to front will damage it apparently).
Hope this makes sense.
Any advice much appriciated.
Cheers
Dave    

[RobPearce]

It does sound like somebody's put the coil in backwards, and you should probably fix that.

I have no idea what that relay is. My best guess would be a rev limiter? Or a not-very-good immobiliser? Either way, it sounds like a bad idea so I'd suggest removing it.