millerlite Posted August 26 Share Posted August 26 is there anyone near kings lynn norfolk that can set up weber twin chokes i have three on mine Quote Link to comment Share on other sites More sharing options...
iani Posted August 26 Share Posted August 26 22 minutes ago, millerlite said: is there anyone near kings lynn norfolk that can set up weber twin chokes i have three on mine Dennis Vessey isn't a million miles from you, he can get you set up using his rolling road. https://www.vessey-classic-car-services.co.uk Ian 1 Quote Link to comment Share on other sites More sharing options...
millerlite Posted August 26 Author Share Posted August 26 1 hour ago, iani said: Dennis Vessey isn't a million miles from you, he can get you set up using his rolling road. https://www.vessey-classic-car-services.co.uk Ian thank you but looking for someone nearer to me he's 83 miles Quote Link to comment Share on other sites More sharing options...
65redspit Posted August 26 Share Posted August 26 I used AtSpeed, they are in Essex but again a fair old drive from Kings Lynn Quote Link to comment Share on other sites More sharing options...
iani Posted August 26 Share Posted August 26 55 minutes ago, millerlite said: thank you but looking for someone nearer to me he's 83 miles What issue are you looking to resolve here? Quote Link to comment Share on other sites More sharing options...
millerlite Posted August 26 Author Share Posted August 26 just bought the car yesterday will be picking up Saturday would just like them checked and set up if necessary Quote Link to comment Share on other sites More sharing options...
iani Posted August 26 Share Posted August 26 29 minutes ago, millerlite said: just bought the car yesterday will be picking up Saturday would just like them checked and set up if necessary I'd see how the car runs & sounds, check the mpg and then decide if it needs attention. It's not difficult to tune DCOE's to get the car running reasonably well, optimising them is much harder and really needs a session with a knowledgeable rolling road operator to get the best out of them, you might have to travel to find one. I have used both Dennis Vessey & Northampton Motorsport. Quote Link to comment Share on other sites More sharing options...
millerlite Posted August 26 Author Share Posted August 26 thank will do Quote Link to comment Share on other sites More sharing options...
Eric JS Posted August 31 Share Posted August 31 Hi Have you tried Steve Cato on the Tottenhill Retail Park on the A10 just after the left turn to Tottenhill village heading towards Ely/Cambridge. You cannot miss the retail park, you want the little access road behind the bigger of the two Circle Waste buildings - on the corner of that building is the Historic sports Car Collection and next to that is Steve Cato’s workshop. If you cannot get information or help there ask the guys in A T JOHNSON. Hope you get on ok. ERIC Quote Link to comment Share on other sites More sharing options...
thescrapman Posted September 1 Share Posted September 1 If you are looking for someone to work on a TR near Kings Lynn, go and see if Bob Scott is still working with Mark O’Malley at the garage in Stoke Ferry. There used to be a very good rolling road near Cambridge. Most nowadays are more adept with laptops than jets. Quote Link to comment Share on other sites More sharing options...
millerlite Posted Wednesday at 04:49 Author Share Posted Wednesday at 04:49 On 31/08/2024 at 22:33, Eric JS said: Hi Have you tried Steve Cato on the Tottenhill Retail Park on the A10 just after the left turn to Tottenhill village heading towards Ely/Cambridge. You cannot miss the retail park, you want the little access road behind the bigger of the two Circle Waste buildings - on the corner of that building is the Historic sports Car Collection and next to that is Steve Cato’s workshop. If you cannot get information or help there ask the guys in A T JOHNSON. Hope you get on ok. ERIC yes know where he is as being local will give him a try , thank you at johnson are just motor factors ? Quote Link to comment Share on other sites More sharing options...
millerlite Posted Wednesday at 04:51 Author Share Posted Wednesday at 04:51 On 01/09/2024 at 10:06, thescrapman said: If you are looking for someone to work on a TR near Kings Lynn, go and see if Bob Scott is still working with Mark O’Malley at the garage in Stoke Ferry. There used to be a very good rolling road near Cambridge. Most nowadays are more adept with laptops than jets. yes thats the trouble now they just want to plug it in a laptop Quote Link to comment Share on other sites More sharing options...
thescrapman Posted Wednesday at 07:22 Share Posted Wednesday at 07:22 Bob was still at Stoke Ferry a few months ago, he did some work for one of the local TSSc members. He used to build engines for Clive Manvers for his rally replica and before that he worked for Ford Motorsport at Boreham I think. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.