overdrive switch

[Davemate]

silly question
i do not have the original loom how are the wires attached the the overdrive switch
are they soldered on or should there be some form of spade end,and do the wires go
in the top or bottom

hope i am making sence

Dave

[Richard B]

They go in the top.

Small 5amp Lucar connectors can be made to fit. Alternatively a friend made me some out of brass tubing with a slot cut in them. The wires were soldered to the ends.

They were a snug fit in the hole. You might find someone who can supply a replacement O/D loom.

[Clive]

I think chopped spade connectors can work, maybe those small red bullet connectors slightly opened up (from memory). I did have a few that were perfect, but all gone and I have no idea where they came from :)

[Deleted User]

if you can find some small car speaker connectors they will fit

[Davemate]

thanks chaps i'll have a word with the engineers at work tonight  :)

Dave

[Richard B]

doug_foreman wrote:

if you can find some small car speaker connectors they will fit

Thats the ones I meant!

[Nick Jones]

Alternatively, for a modest fee Mr Rarebits can supply you with the "gearlever loom" with the correct connectors and special skinny, high temperature wire.  Good investment IMO.

Nick

[Davemate]

Nick_Jones wrote:

Alternatively, for a modest fee Mr Rarebits can supply you with the "gearlever loom" with the correct connectors and special skinny, high temperature wire.  Good investment IMO.

Nick

have done today !!!