animator Posted June 1, 2008 Share Posted June 1, 2008 I've got some aluminium hub caps that fit a Herald (or similar) does anyone know which model had these fitted? Link to comment Share on other sites More sharing options...
Steve AKA vitessesteve Posted June 4, 2008 Share Posted June 4, 2008 It would be easier to identify them if post a picture. Link to comment Share on other sites More sharing options...
animator Posted June 6, 2008 Author Share Posted June 6, 2008 Heres a pic. Link to comment Share on other sites More sharing options...
Clive Posted June 7, 2008 Share Posted June 7, 2008 they look like normal herald/vitesse/spitfire caps. Are they def ali?? Link to comment Share on other sites More sharing options...
ferny Posted June 7, 2008 Share Posted June 7, 2008 They look a lot like stainless to me. I see one or two area's which look like chrome pitting but there's no way you'd mistake that for alli so they may just be dents. Link to comment Share on other sites More sharing options...
animator Posted June 7, 2008 Author Share Posted June 7, 2008 They are Anodised aluminium Link to comment Share on other sites More sharing options...
heraldcoupe Posted June 7, 2008 Share Posted June 7, 2008 animator wrote:They are Anodised aluminiumNo idea what they're for then. Herald hubcaps were chrome plated steel, though very similar on style to what you have,Cheers,Bill. Link to comment Share on other sites More sharing options...
herald948 Posted June 7, 2008 Share Posted June 7, 2008 I've run into similar parallels with Standard 8/10/Pennant hubcaps, where there supposedly were "export" versions in stainless rather than chromed steel. Perhaps there was something similar going on, as the ones in the photo certainly look to be the same pressing normally found on Heralds, et.al. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.