Ben Hutchings Posted March 29, 2021 Share Posted March 29, 2021 My GT6 mk1 boot is leaking like a sieve, 99% sure it’s the window rubber seeing that it’s crustier than a piece of toast and has shrunk away from the glass. I see quite a few folks selling these for about £30-40. Any difference in quality do you know? Quote Link to comment Share on other sites More sharing options...
Tim Hunt Posted March 29, 2021 Share Posted March 29, 2021 I would try www.woolies-trim.co.uk Ben. They seem to have the right profile for just about anything! Tim Quote Link to comment Share on other sites More sharing options...
TimW Posted March 29, 2021 Share Posted March 29, 2021 T D Fitchetts still have new old stock rear hatch seals that are a perfect fit unlike others who's are either too small or too large for the glass Quote Link to comment Share on other sites More sharing options...
Ben Hutchings Posted March 30, 2021 Author Share Posted March 30, 2021 Thank you Tims, I shall check with both today. Quote Link to comment Share on other sites More sharing options...
Tim Bancroft Posted March 30, 2021 Share Posted March 30, 2021 Another Tim here! I am fairly certain that Canleys hold stock of good quality seals if you get no where with Woolies. My experience of Woolies (without sounding too negative) is that they are dear.... As you know I am an advocate of Canleys, so maybe I should be discounted... Quote Link to comment Share on other sites More sharing options...
iani Posted March 31, 2021 Share Posted March 31, 2021 I have just returned a Canley’s seal as it was too large, Fitchett’s sell original seals which fit perfectly as TimW suggests. Quote Link to comment Share on other sites More sharing options...
Ben Hutchings Posted March 31, 2021 Author Share Posted March 31, 2021 Ok thanks a lot, I also usually use Canley Classics for everything, but as we have two votes for Fitchetts I'll give them a go 👍 Quote Link to comment Share on other sites More sharing options...
iani Posted March 31, 2021 Share Posted March 31, 2021 5 hours ago, Hutch said: Ok thanks a lot, I also usually use Canley Classics for everything, but as we have two votes for Fitchetts I'll give them a go 👍 The Fitchett ones are genuine old stock, as such they are covered in whatever protective wax stuff was on them 50 years ago, it takes a bit of effort to clean it off but it's well worth the effort. The seal fits onto the glass perfectly, no need for any lube, it then fits tightly onto the aperture with the aid of some cord, a much easier job than I expected. Quote Link to comment Share on other sites More sharing options...
Guppy916 Posted May 14, 2021 Share Posted May 14, 2021 I am looking for a new tailgate seal (not the glass to tailgate) for my GT6 Mk3, I was looking towards https://coh-baines.co.uk/product-category/classic-car/triumph/ advice please Fitchett's, Rimmer's, Canley's ? Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.