found FOUND! Dolomite NS (left) Front wing part.

[yorkshire_spam]

I know it's a million to one shot, but does anyone have a NS (left) front wing panel with the area marked in red intact/good condition?

The muck/damp has gathered on top of the plastic "eyebrow" and rotted through from the back so I'll need to repair the one on Binny.

Cheers, Sam

Edited July 14, 2021 by yorkshire_spam

[RobPearce]

They all rot out there. It's a horrid mud trap.

On my Toledo I fabricated a patch for that bit in three or four parts with a bit of hammering. It worked out quite well with not too much filler needed.

[yorkshire_spam]

24 minutes ago, RobPearce said:

They all rot out there. It's a horrid mud trap.

On my Toledo I fabricated a patch for that bit in three or four parts with a bit of hammering. It worked out quite well with not too much filler needed.

Yeah, I thought that would probably be the case, but I just thought I'd take a punt and see if I could avoid a load of messing making one.

Cheers, Sam

[poppyman]

13 hours ago, yorkshire_spam said:

Yeah, I thought that would probably be the case, but I just thought I'd take a punt and see if I could avoid a load of messing making one.

Cheers, Sam

I'm pretty sure TDC do a panel Sam, but from memory its fibreglass.

Tony.

[yorkshire_spam]

Thanks Tony, as the rest of the wing is solid I'm considering a full fibre-glass wing as a last resort.