spit1972 Posted June 3, 2009 Share Posted June 3, 2009 Hi all just a quicky,could i drop a 1500 unleaded head straight on a 1300 block?Cheers steve Link to comment Share on other sites More sharing options...
Nick Jones Posted June 3, 2009 Share Posted June 3, 2009 It will physically fit but you will end up with a very low compression ratio as the 1500 head has deeper chambers. Ok for running on parafin but no good for power. Should you still wish to proceed (I wouldn't) you will need 1500 pushrods as the 1300 ones will be too short. It is possible to skim the head to correct this but it is a considerable skim!CheersNick Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.