beefertoo Posted March 29, 2009 Share Posted March 29, 2009 will a saloon head with the engine no ml21723he be ok to replace the head on a gt6 with the no ke21046he? both of them have got tags on the rear(recessed?), only got to check the spit again today and it looks like the valves are causing the low compression so the heads got to come off, have got the saloon one sitting there and its more conveniant to do that one up and then swap them. thanks craig Link to comment Share on other sites More sharing options...
JohnD Posted March 29, 2009 Share Posted March 29, 2009 ML=MkII 2000KE=MkIII GT6I think that they are interchangeable.BUT, the GT6 will have dome top pistons, and 2500 sized chambers in the head.If the 2000 engine does not have domes, then it has small chambers, and the compression ratio when fitted to the GT6 will be about 14.John Link to comment Share on other sites More sharing options...
Gt6s Posted March 30, 2009 Share Posted March 30, 2009 JohnD wrote:ML=MkII 2000KE=MkIII GT6I think that they are interchangeable.BUT, the GT6 will have dome top pistons, Recessed block 2000 also uses domed pistons. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.