GreenV8Machine Posted May 13, 2014 Share Posted May 13, 2014 The replacement floor pans available dont look like my originals. How good a fit are the replacements from earlpart and theres no flat area to weld the outriggers to. Is it a case of weld to the bit of the pressed channel where possible? Quote Link to comment Share on other sites More sharing options...
GreenV8Machine Posted May 13, 2014 Author Share Posted May 13, 2014 think ive solved it now. Quote Link to comment Share on other sites More sharing options...
G.in_Lux Posted May 13, 2014 Share Posted May 13, 2014 Elaborate, do... Quote Link to comment Share on other sites More sharing options...
willows40 Posted May 13, 2014 Share Posted May 13, 2014 The kink in the floorpans on the last few i have fitted have been in the wrong place, Apart from that they are not that bad a fit and quite a good match, looking at your pictures of your outriggers in other posting noticed that it looked like a stag outrigger that you fitted, these are slightly different shape to original, so a little reshaping is requiredCheers Andy Quote Link to comment Share on other sites More sharing options...
ferny Posted May 13, 2014 Share Posted May 13, 2014 Are the floorpans for the early ones with the exhaust underneath the front seat different at all? Quote Link to comment Share on other sites More sharing options...
GreenV8Machine Posted May 13, 2014 Author Share Posted May 13, 2014 this is just the front section in front of the seat Quote Link to comment Share on other sites More sharing options...
DJB_Harvey Posted May 13, 2014 Share Posted May 13, 2014 All the floorpans and underneath sections are the same on all cars ... So you could in theory fit the very early Mk1 transverse exhaust system to a 1977 2.5S ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.