Rychu Posted June 21, 2014 Share Posted June 21, 2014 Hello Folks,Can you recommend how best to store unpainted panels before everything goes for a re spray?Is there a non porus primer or anything else that is simple to apply?Regards Richard Quote Link to comment Share on other sites More sharing options...
ferny Posted June 21, 2014 Share Posted June 21, 2014 Spray with zinc primer if you're worried but if it's being stored somewhere dry it'll be fine as is. Quote Link to comment Share on other sites More sharing options...
TedTaylor Posted June 22, 2014 Share Posted June 22, 2014 If the panels have been manufactured with a Zintec coating they will store in the dry (or even very slightly damp) without any need for further protection. MUT Quote Link to comment Share on other sites More sharing options...
Hogie Posted June 22, 2014 Share Posted June 22, 2014 Hi Richard, most primers, zinc or not, are porous and may not protect for a long time. They will give some protection in a dryish climate.Bondarust primer (aerosol or brush) is non-porous and should protect better than most and is a good base for other paints.Roger Quote Link to comment Share on other sites More sharing options...
69vitesse Posted June 30, 2014 Share Posted June 30, 2014 A big plus 1 for Bondaprimer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.