sparky_spit Posted July 16, 2021 Share Posted July 16, 2021 (edited) Just before the 2019 10CR I bought new rear trunnion kits to fit to my Spitfire. I ended up not using them as they were dimensionally wrong (see other threads on this) and reused the best bits of my collection of used spare ones. I now need to replace the nearside one as it has developed too much play. Has anyone bought a kit recently and found it to now be okay? And have the top-hat bush flange ends been squared off properly to support the O ring seal? I suspect they all come from the same manufacturer, regardless of end retailer, and just don't want to end up with useless parts again. Edited July 16, 2021 by sparky_spit Quote Link to comment Share on other sites More sharing options...
yorkshire_spam Posted July 16, 2021 Share Posted July 16, 2021 I did mine a few years ago using Superflex, you just use the 2 bush halves and the centre sleeve, no seals or caps. https://www.superflex.co.uk/proddetail.php?prod=SF375-1850KSS Quote Link to comment Share on other sites More sharing options...
sparky_spit Posted July 16, 2021 Author Share Posted July 16, 2021 Perfect - I didn't think of those. I'll order some now. Thanks! Quote Link to comment Share on other sites More sharing options...
thescrapman Posted July 17, 2021 Share Posted July 17, 2021 I purchased some kits recently, they really are quite poor. i may be raiding some old shafts in search of usable bits. Or ring Mr Witor. He has been a bit hard to get hold of lately apparently. Quote Link to comment Share on other sites More sharing options...
TimW Posted July 25, 2021 Share Posted July 25, 2021 Poly all the way!! So easy in comparison to the hard bushes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.