STJ Posted December 10, 2017 Share Posted December 10, 2017 Currently trying to replace windscreen to 13/60 Herald convertible after respray. Really struggling with replacing the finisher edge. It appears to be plastic, with little 'give'. Can anyone offer any advice? Thanks. Quote Link to comment Share on other sites More sharing options...
glang Posted December 11, 2017 Share Posted December 11, 2017 I believe its got to be warmed - if possible immersion in warm water and/or hair dryer (especially for the bends).... Quote Link to comment Share on other sites More sharing options...
Dogsbody47uk Posted December 11, 2017 Share Posted December 11, 2017 Quoted from glang I believe its got to be warmed - if possible immersion in warm water and/or hair dryer (especially for the bends).... Correct! Quote Link to comment Share on other sites More sharing options...
ferny Posted December 12, 2017 Share Posted December 12, 2017 If too cold it'll snap. If "normal" temperature then it just pushes in. Keep in mind they shrink a lot so don't trim too short. Try some lubrication if you're struggling.If all is clean it takes about 20 mins to get one out and new in with sealant. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.