Jump to content

Eldwick

Non-Member
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Eldwick's Achievements

Apprentice

Apprentice (3/14)

  • Week One Done
  • One Month Later
  • First Post
  • Conversation Starter

Recent Badges

0

Reputation

  1. Looking for a 3.27 diff. Would take a spare / scrap diff as long as the case was not damaged or cracked. If it is a reconditioned diff I would need to see bills / pictures and get a guarantee. Many thanks. Eldwick
  2. Thank you all for your input here. I have now solved most of the problem. I put a bulb in the holder and it comes on and off when the courtesy light does and I managed to untangle the wires and it does reach the drivers side, near enough to the steering column. This being the case I think it is almost the same as your fitting Rob. All I need now is to track some sort of bracket down because the major suppliers don't do the part. Anyway, thank you once again for your input. Cheers!
  3. Thank you all for the replies, Rob can you tell me if the light you have is on the passenger or drivers side? I will take your word for 160021 being a back light but it is hard to see what it would have lit up back there? The sliding slots perhaps!😄 Thanks,
  4. Hello, can anyone (Rob Pearce?) help me with the following issues? I am having problems with the wiring on my GT6 MKIII and as part of the ongoing investigations to solve issues I have come across something that is puzzling me. I have got a wiring diagram and there is one item on there labelled "Ignition Key Lamp". I do not appear to have one of these. My ignition is down on the steering column so any lamp, I assume, would be down there somewhere? However, in removing the centre part of the dash I found what appears to be a spare bulb holder (wired up) but just rattling around loose. I looked on the original GT6 schematic drawings (Courtesy of Canley Classics Plate T17 [06-27]) and this further confused me. It shows a Bracket Ignition Switch 627318, but this is shown on the passenger side of the dash. The drawing also shows yet another bulb holder 160021 (or UKC1562), what the devil is this for? Perversely this is in the position of the holder I found behind my dash but I have nothing in either the passenger or driver’s side for illumination of any kind. Help! Can you explain any of this? Kind regards.
×
×
  • Create New...