D412REN

Hi all hand brake on if I move the passenger or driver side wheel forward and back slightly I get a very small amount of knocking noise sounds like your tapping metal on metal checked all the most common stuff but can’t find it any help will be much appreciated many thanks Darren.

The holes are there already but not been put back on when restored ☹️

I think it should be a pair of these

On my 13/60 convertible I’ve been told there is other striker plates required on both front doors the car was fully restored back between 1989-1991 and were never refitted trying to find a part number also if anyone as a picture of both sides as cannot find anything on the web many thanks Darren.

Hi all just a bit of info if your tank sender units gives up peel these 3 tabs over and you’ll see the broken wire 👍 it’s only the thin piece of wire that attaches the sensor to lift arm this is a hair line wire which I updated it to copper 1.3 mm and works perfectly fine. many thanks Darren.

Thanks for the information clive I’ve been on the phone 1/2 of today no one as one anywhere the earliest I can get a new one is 31st august paddock says there got them but you click on purchase it states no stock 😢 I’ve filled it with nuts bolts washers 30ltrs of white vinegar carbonate soda and stuck it in the cement mixer and it’s sorted it now can’t get the pig to start carb strip tomorrow 🙈

I will buy a new one if anyone as one or if not a very good secondhand one with no rust inside. urgently required. many thanks

Get in the BOOT 😂😂 I’m 6’5 🙈 there’s no hope for that.

I’m having really bad trouble to remove the fuel tank someone as stated it’s a Vitesse tan that is fitted in the boot. just cannot get it to budge any help will be much appreciated many thanks Darren.

🙄 herald 13/60 1970 long day today sorry

Am I thinking the upper ball joint is the same as the lower ? many thanks Darren.

***** update ***** I bought a brand new voltage regulator from evil bay put on on Wednesday and yes the light is still on I bought a second hand unit on market place for 5.00 at it works fine the chap on eBay said 100% genuine Lucas 100% total 💩 look on the base made in china 😳🙈☹️ many thanks Darren.

Thanks for the info people I managed to get some gates fuel pipe ordered from local factors. all fitted job done many thanks Darren.

Hi all anyone got one sitting in the shed or garage they don’t want and want to sell me plus also be willing to post please postage and packaging will be paid for many thanks Darren.

I no there’s a thing on Google how many left BUT is that actually correct does anyone else you no. also is there a chassis plate detailed information as of what colour your wheels were when it left the factory. interior colour trim level etc etc. just curious to no as I’d like to put it back to how it’s supposed to be as I like them as they were when they left the factory. many thanks Darren.

I need to no what size fuel pipe I’ll need to purchase as some stupid person as used vacuum hose as fuel line 🙈 I gather the pipe coming out the top of the tank is the main feed to pump then from the pump yet again vacuum pipe 🙈 but also did not have anything the correct sizes as it’s different both sides is there a proper fuel line for this or is it a gamble many thanks Darren. 🍻👍

Thanks rob for your input I found it to have a dodgy fuel line plus I’ve bought a carb rebuilt kit many thanks Darren.

I own a 13/60 1970 it idles really great I took for a drive today and under load 2nd gear put my foot down and it coughs and splutters. can any one help also we’re is the fuel feed from the tank I can a reserve flip over but nothing else. many thanks Darren.

Yes I have the thick brown and yellow plus a small brown and yellow underneath I have put brass connectors back on with rubber boots. the dynamo is brand new. so I’ve ordered a new voltage regulator. when I removed the top today the valve to the right if I push it down the light goes off. but then comes back straight away. thanks for the info Darren.

WANTED Rear back part of the seat please if anyone as one for sale will pay postage and packaging etc forgot to add it’s red pleats go vertical if they were both ways. many thanks Darren.

No it stays the same. ? Dynamo What colour cable would that be please many thanks. darren.

The light is permanently on thanks. Darren.

Thanks I appreciate your comment the car was fully restored in 1989 and was then left in a garage since 1994 we’re it stood for 28 years. I’ve changed the brake master front callipers ✅ carb rebuild kit ✅ I'm going to need a few bits if you no anyone who can help with those. also does anyone no what the colour code would be yes I no it’s green 😂🙈 it’s only come with the paperwork for the restoration and a old v5 ☹️ no hand books etc I also have a pull switch on the dash that looks like adjustable steering column but I can’t see it having that myself any information will be much appreciated just added some more pictures the paint is very good just loads of elbow grease to get it how it is many thanks Darren.

What do I need it’s for a 13/60 1970 thanks Darren.

Thanks for feeling welcome I will be looking for some parts soon if anyone can help me with them. many thanks Darren.