Hammy
-
Posts
19 -
Joined
-
Last visited
Never
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Posts posted by Hammy
-
-
Hi all, how do I wire my overdrive gearbox to a 13/60 it's a j type single rail with switch on top of gearstick
Any help gratefully accepted
M -
Hi all I am trying to fit an j type overdrive gearbox to my 13/60....I have fitted gearbox but mounting plate to chassis is about 6 inches out to gearbox.....its forward on closer inspection I think I have a d type gearbox mounting plate (looked it up on canleys) my question is...looking at j type mounting plate (again on Canleys) it looks smaller and mounting to chassis holes look as if they are a different too ........is this the right mounting plate, next question how do I move my engine forward about 10mm as the propshaft is too tight and will not turn
Any help gratefully received as I'm at my wits end with it now -
Thanks for all the help,now have all the bits I need to replace gearbox ..........gulp......... Wish me luck
-
Hi all, probably a daft question but........anyone know where I can get a drive flange that fits a j type overdrive gearbox to propshaft it's 3 5/8 inch diameter,nothing I have on my herald 13/60 fits, my old propshaft drive flanges are not the same size thanks in advance
Also does anybody know how to wire the overdrive up or know of a kit to wire it up. I have a switch on the gearstick if that helps thanks -
Thanks for the links and info
Showing off now,made my own spacers out of some 303 stainless bar at work (only because I didn't think of it till you mentioned it mazfg) -
Just stripped my replacement swing spring for a herald 13/60 can you tell me where you bought the new bolts nuts and spacers etc to renovate thanks
-
Thanks Casper that was very good reading, I'll get cracking with some box section and, a welder.......
-
Hi all,has anyone fitted 3 point or inertia real seat belts to the back of a 13/60 convertible or know where I can find information on how to do it
Thanks in advance for any help -
Thanks for that Casper, new question, when it says working length,what does it mean? eg from where to where
-
Hi all, does anybody have a size diagram or know where I can find one for shortening propshaft on my 13/60 to fit a single rail j type overdrive gearbox thanks in advance
-
Thanks for clarifying that Nick,thanks for all the good advice everybody,off to ebay now to see what I can find!!!! Will be back for more help later when my Xmas money runs out,..........
-
Sorry Nick if I've misunderstood do you mean an overdrive gearbox or a standard 1500 dolly/spitfire?? The reason I want to upgrade is to give it better cruising speed and not feel like I'm thrashing it over 50mph, thanks for the help so far
-
Would like to add an overdrive gearbox to my 13/60 but keep the engine the standard 1300, the problem is I've no idea which type to use, now come the questions........
1.which gearbox should I look at getting
2.which differential would be best 3.89 or 3.63
Any other advice gratefully accepted
Thanks -
As you can see from photos my doors are not right neither shuts properly without a good shove!!!! How can I get the gaps better so doors shut properly thanks in advance before I forget the passenger door is worse but can,t get that photo to upload
-
As you can see from photos my doors are not right neither shuts properly without a good shove!!!! How can I get the gaps better so doors shut properly thanks in advance before I forget the passenger door is worse but can,t get that photo to upload
-
Hi I'm new to heralds too (purchased a 13/60 last month) and my engine no. Is GE.....HE so has it come out of a spitfire or were they fitted to 13/60's as well, would like to tune mine up a little too so any info gratefully received
-
Pete thanks so much for that now I'm off to order them ready for Xmas
-
I am looking to purchase a set of minilites for my 13/60 I know the pcd is 95.25 and size of wheels is 13 x 5.5 however what's the best size tyre to fit this combination?? Thank you in advance
Overdrive wiring
in Drivetrain
Posted
Brilliant thanks so much Colin, I'll let you know how I got on,