Jump to content

Jimmmy0_0

Club Member
  • Posts

    126
  • Joined

  • Last visited

Posts posted by Jimmmy0_0

  1. Hi All

    My wipers are not traveling though their full range, the play in the system seems to be in the wiper motor gearbox as the car is a mk1 pi its a two speed motor.

    My question is are the single speed and 2 speed gearboxes the same? (hoping I can swap the motor over)

    If their not does anyone know where I can get the one I have overhauled?

    Cheers James

  2. I do have to say that I am going to blame Matt even if it wasn't him as he did beat me. I guess I could blame him for the alternator bolt snapping on the way home to, ;D

    I will check the prv valve first. I have spare sets of shells, and a spare oil pump.

    So its going to be a couple of late evenings as the car is entered this weekend.

  3. Ok so last week Matt Helm and I were using my car at the Csma Auto solo. At the end of the day the oil pressure had dropped to 30 psi at 3000 rpm and dropped to between 5 and 10 psi at idle.

    I thought that this was just due to the abuse that Matt and I had been giving the car all day. When I arrived home I left the car to cool down till the next evening. When I started the car the next day the oil pressure was back to normal at about 65-70psi. I took the car for a drive about 8 mile and when the engine got back up to normal temp the oil pressure dropped off again.

    Anyone have any ideas what could be causing this

  4. Hi all it’s a sad day as car 15 has had to pull out. I have known that I was going to need knee surgery on both my knees for a while, but following MRI’S on both knees they booked me in Monday just gone for ligament surgery. All went well but with no driving for a week and no kneeling for 4 weeks, we are having  to pull out.

    I would like to wish everyone the best of luck and will hope to see ALL of you at the Sixpenny Handley Control, subject to walking ok and not like Frankenstein’s monster.

    All the Best
    James and Andy

  5. Hi all

    I am looking to fit a radiator fan switch, but am not sure what temp I need.

    Would the car being setup for doing autosolos and track days make any difference ?

    Does anyone know what temp I should be using?

    Thanks James

×
×
  • Create New...