Luke Valvona

Cheers Nick! Found a few online but wasn’t sure about the low PSI pressure rating as most information I found online said I should have between 2-3PSI

Hi all, anyone know if the HUCO sucker pump with the 1.4PSI rating is suitable for the GT6? Don’t want to get the wrong one

Yeah….I’m thinking that now.

Do you have any pictures of your setup? Mainly looking at the fuel pipe running and locations

Hi All, thank you for all the replies! Blown away by the help. In answer to some questions, I bought a pump from a trade show (it looks like this one) https://www.ebay.co.uk/itm/202771434372?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CEznwNDXSmu&sssrc=4429486&ssuid=byXeiIxMSGG&var=&widget_ver=artemis&media=COPY so will probably look at this Huco range. @Nick Jones Does anyone have a link to one they used? Found a few online but not if the right type as it seems to vary with pressure ranges. will be looking to install in the engine bay (as I think this will be better for access!) so will get a suction type. I also like the idea of moving the location of the fuel line. @GT64fun

Hi all, looking to fit an electric pump to my gt6, (unless I’m convinced otherwise….), has anyone done this already who could offer some guidance? questions I currently have are: were to fit the pump (I’m looking at as close as possible to the tank) did you fit a pressure regulator (I do have one to hand) did you wire it into the ignition or a separate switch? did you install a cut off? In case of an accident etc? cheers