MSter
-
Posts
88 -
Joined
-
Last visited
Never
Content Type
Forums
Blogs
Events
Downloads
Gallery
Membership & Shop
Everything posted by MSter
-
Hi does anyone know or have the small rectangular plate that has one round hole and one elongated hole that fits the bonnet to the chassis?? Anyone know where I can get one other than make one up?? Can’t seem to see them on canleys
-
Hi I have now finished restoring my bonnet and need to refit however I can’t remember how it goes back together does anyone have an exploded drawing showing this
-
Thank you very much
-
Thank you very much
-
Hi I have lost the 12 bolts (6 a side, 3 per hinge) that hold the door hinges to the bulkhead I have the ones that hold the hinge to the door but not the ones that hold the hinge to the bulkhead can anyone tell me what I need to order size and thread etc any help will be greatly appreciated
-
Hi I have lost the 12 bolts (6 a side, 3 per hinge) that hold the door hinges to the bulkhead I have the ones that hold the hinge to the door but not the ones that hold the hinge to the bulkhead can anyone tell me what I need to order size and thread etc any help will be greatly appreciated
-
Hello all I need to purchase a new rear centre valance for my triumph herald I have found T D Fitchets sell them has anyone purchased one of these from them and know what the fit is like?? Thank you in advance
-
Thank you very much appreciated
-
Like this
-
Does anyone know where I could get some of these clips and what they are called they are what hold the wonder mechanism onto the bottom of the door glass
-
Thank you
-
Hi i am in the process of reassembling my triumph herald i believe there should be some kind of spring loaded contact coming out the back of the horn can anyone help me if there should be where can i get one and what are they called??
-
Hi i need to buy some wheel arch repair panels for my 13/60 bonnet where would people recommend the best place to buy them from Rimmer Bros are the cheapest i have found with canleys only £5 more expensive any others worth trying??
-
Is there a similar colour to royal blue in a modern vehicle that anyone could recommend halfords want £15 a tin to make up a 300ml happy to spray whole car in modern day blue if it's near enough tot the original colour any suggestions??
-
Thank you
-
think its royal blue here is a picture of It all be it a bit dusty
-
Hi all Am after some help I have a dark blue herald it's a j reg 13/60 I would say it's a royal blue does anyone know what triumph would call this colour apologies for the poor explanation and that I haven't got a picture to hand any ideas?? On the log book it just says blue!!
-
Hi all the steering wheel from my triumph herald has worn over the years could someone please tell me what the original colour and or material would have been. The steering wheel is original and from a 13/60 j reg I'm assuming the wheel is metal would it have originally been rubber coated or just painted powder coated?? Any help greatly appreciated
-
No its just a normal herald with normal power going through it no leaks and fairly certain it was fine when taken out of service whats the best oil to put in it and how much??
-
ok im in the process of restoring a 13/60 triumph herald its been off the road 20 years drove fine before coming off however I wasn't looking to touch the diff but now think while im there I might as well give it an overhaul. Can I do it myself im quite confident to strip it down and rebuild are they easy to overhaul and what would people recommend new seals?? im not sure what is in there so would rather have everything ready to do the job Any help/advice is greatly received
-
Hi Just after some advice regarding fuel pipe size I have a Herald 13/60 can someone tell me what size the copper microbore fuel pipe should be I have been told by one person 1/4 I went on the Halfords website they have some copper pipe which is 3/16 but they say this is the inside diameter which i heard from someone else that there is no accurate way to measure the inside diameter!?! So my question is would the 3/16 pipe do or do i need to find 1/4??
-
Hi can anyone recommend a herald fuel line kit im after a full kit from petrol tank to petrol pump ideally including a fuel filter??
-
Thank you
-
Hi All Just after a bit of help just rebuilt my front calipers following them being shot blasted does anyone know where the flexi brake pipe screws into the caliper should there be any kind of washer or gasket there?? I stripped them down some time ago there wasn't anything with the new parts I purchased but want to check.
-
Thanks for these I purchased some colour wiring diagrams off fleabay but don't seem to show everything. These will be great thank you does anyone know the diameter of the ignition cable is it 2mm sq??